BEL 4567 electronics

Repair and spare parts for electronics keyboards

Search
Login
empty
Your cart is empty

Hob2Hood module V3 - Programmed board Wifi

Bel.4567


 Hob2Hood module V3 - Programmed board Wifi  Hob2Hood module V3 - Programmed board Wifi  Hob2Hood module V3 - Programmed board Wifi  Hob2Hood module V3 - Programmed board Wifi  Hob2Hood module V3 - Programmed board Wifi  Hob2Hood module V3 - Programmed board Wifi
arduino_uno_d1_r32-set.jpg
hob2 hood-board-V3-wifi

Hob2Hood module V3 - Programmed board Wifi
Bel.4567

Price:
540,00 Kč



In Stock: 13 pcs




Description

DEMO and MANUAL ↗
Take a look at the web interface

Component Selection Assistant ↗
Select the necessary parts.

Hob2Hood WiFi Control Board – Programmed

A smart "brain" for your range hood with WiFi control. An ESP32 board with pre-installed firmware that connects your Hob2Hood-enabled induction cooktop with your range hood, adding a full-featured web interface, automatic temperature/humidity sensing, cooking history, and remote control.

We offer the programmed board only – ready to be wired to your specific range hood. Relay modules, sensors, display, and IR receiver can be added as needed (see below).

Key Features

  • Hob2Hood – receives IR signals directly from the induction cooktop to control lighting and extraction speed.
  • Web Interface – control and configure everything from your smartphone, tablet, or PC, without installing any app. Available in Czech, English, German, Polish, and Spanish (custom language files can be uploaded).
  • Remote Control – works via web interface, IR remote, or manual switches/buttons on your hood. Supports both toggle and momentary push-button controls.
  • Temperature & Humidity Automation – automatic activation when set limits are exceeded, with adjustable hysteresis and time windows.
  • Fan Overrun – keeps the hood running for a set time (0–60 min) after cooking to extract residual steam.
  • Display – shows current temperature and humidity, cooking timer, or synchronized NTP clock.
  • Cooking History – tracks the last 30 light activations with date, time, and duration to monitor your cooking habits.
  • Learnable IR Codes – IR codes for both the cooktop and remote can be configured manually or "learned" by capturing signals from your remote.
  • 6 Outputs – lighting and up to 5 switched circuits, each assignable to fan speeds.
    1 PWM Output – for remote motor control (0-10V) using a PWM/0-10V converter; relays can then be used for damper control.
  • Over-the-Air (OTA) Updates – firmware updates directly via web browser, no cables required.
  • NTP Time Sync – automatic time synchronization via internet with timezone and DST support.

Technical Specifications

  • Core: ESP32 (WROOM-32) in Arduino UNO form factor (D1 R32 board), CH340 converter, 4 MB flash
  • Power Supply: 5 V (USB / Vin pin)
  • Connectivity: WiFi 2.4 GHz
  • 6 Control Outputs: Lighting + V1–V5 (active low)
  • Inputs: 5 switches (light + 4 speeds), IR receiver, DHT11 sensor
  • Display Interface: I²C (OLED SSD1306 128×32/64)
  • Signal Logic Level: 3.3 V

Required Accessories

The board is a control unit – it does not include power or peripheral elements. Based on your hood type, you will need:

  • Relay or SSR module for motor and light switching,
  • IR receiver (e.g., TSOP 36 or 38 kHz),
    Remote control (CR2025 battery)
  • Optional: Temperature/humidity sensor (DHT11 or SHT30/SHT31 I²C),
  • Optional: OLED display (SSD1306 I²C),
    Optional: Control switches or push-buttons.
    Can be housed in a plastic enclosure.
    Power via USB-C or a 9V power adapter.

Package includes a 5x5 breadboard and a set of jumper wires. Wiring schematic and pinout diagram available for download. Signal components (IR, DHT11, OLED) operate on 3.3 V.

Firmware is continuously developed and free updates are provided for at least 2 years. You can find firmware files in your account under "My Files". Language files will be added there as well.

You must connect a power circuit for the lighting and fan to the relay board. (Not included in the delivery)

WARNING: Risk of electric shock.
This device is designed only for switching power circuits up to MAX. 25 V AC / 60 V DC.
For higher voltages, which are life-threatening, you must use a certified relay or SSR module.
If you use non-certified Arduino relay or SSR modules for life-threatening high voltages, you do so at your own risk.
Connection of motors and lighting using hazardous voltages to this module is permitted only by persons qualified to work with electrical equipment.

FOR V2 USERS
Upgrading is simple: just replace the board. V3 is backward compatible with your existing OLED/LCD display – however, it is no longer required for configuration, as everything can be conveniently set via web browser on your phone or PC.

Wiring Notes:
Pinout is different from the previous version, and the new board uses 3.3V logic instead of the original 5V. For relay modules, this means separating the jumper and providing 3.3V (for logic) and 5V (for relay coils) separately. Please wire the board according to the included schematic – basic knowledge of wiring is recommended. Schematics and manuals are provided, and we are happy to assist with any questions.

V3 Features Summary:

- WiFi and Web Interface – full configuration via browser, no display or IR remote needed
- Language selection – Czech, English, German, Polish, Spanish, plus custom translation support
- OTA Firmware Updates – easily add new features; the board notifies you of new versions
- Temperature/Humidity Automation – automatic extraction triggered by sensor data (e.g., while cooking); adjustable thresholds, hysteresis, and time windows
- Custom IR Codes – configure your own remote or cooktop codes (manual entry or "learning" mode)
- NTP Time Sync – clock and date display with configurable idle-state view
- Cooking History – overview of past sessions including duration
- Sensor Support – supports newer SHT30/SHT31 (up to 125 °C) as well as the original DHT11
- …plus many other settings (switch priority, toggle/momentary modes, multi-relay assignment)

Price and Discount:
As a V2 owner, you are entitled to a 300 CZK (12 €) discount – making the new board only 240 CZK (approx. 10 €).

How to apply the discount:
In the cart, enter your registered email address (the one where you received this notice) as the discount code. The discount will be applied automatically.



s PPL      m GEIS


D zasilkovna       D GEIS BIG


Small nobg lightmode


D Fio
    paypal logo

qrcode paypal 2